Description and Technical Data:
1) Overview/Key Features
The Teltonika FMC230 is a rugged, water- and dust-resistant 4G LTE Cat 1 vehicle tracker designed for fleet management, heavy equipment, agriculture, construction, mining, and other demanding telematics applications. Its IP67-rated housing allows installation in exposed or harsh environments, while configurable inputs and outputs support vehicle monitoring, sensor integration, fuel tracking, and remote control.
Key features include:
- 4G LTE Cat 1 connectivity with 2G GSM fallback
- Internal GNSS and LTE antennas
- IP67-rated housing for dust-tight and temporary water-immersion protection
- Flexible digital, analog, negative, and impulse inputs
- Three configurable digital outputs
- Bluetooth® 4.0 and Bluetooth Low Energy connectivity
- Internal rechargeable backup battery
- Green Driving and overspeeding detection
- Excessive-idling, towing, crash, unplug, and geofence detection
- Immobilizer and iButton read-notification functions
- Impulse input for fuel-flow-meter data
- Support for door sensors, alarm buttons, seatbelt detection, fuel sensors, and other accessories
- FOTA firmware and remote configuration support
- Suitable for installation inside or outside vehicles and machinery
Minimum orders apply. B2B customers please contact Mirifica Industrial for volume quotes. Mirifica Industrial ships world-wide.
2) Tech Specs
| Specification | Detail |
|---|---|
| Product type | Rugged 4G LTE vehicle and asset tracker |
| Cellular technology | LTE Cat 1 with 2G GSM fallback |
| LTE category | Cat 1; up to 10 Mbps downlink and 5 Mbps uplink |
| LTE bands | Regional variants available; supported bands depend on the selected order code |
| GNSS systems | GPS, GLONASS, BeiDou, Galileo, and QZSS |
| GNSS antenna | Internal |
| Cellular antenna | Internal |
| SIM support | Micro-SIM and eSIM, depending on the order variant |
| Bluetooth | Bluetooth® 4.0 Low Energy |
| Digital inputs | 3 |
| Digital outputs | 3 |
| Analog inputs | 2 |
| Negative inputs | 1 |
| Impulse inputs | 2 |
| Accessory interfaces | 1-Wire and CAN-adapter support |
| Power supply | 10–30 V DC |
| Backup battery | 170 mAh, 3.7 V Li-Ion |
| Battery energy | 0.63 Wh |
| Housing protection | IP67 |
| Dimensions | 85 × 67 × 26 mm |
| Weight | Approximately 55 g |
| Operating temperature | −20 °C to +85 °C |
| Sensors | Accelerometer and Bluetooth® Low Energy sensors |
| Configuration | Teltonika Configurator, SMS, GPRS commands, Bluetooth®, and FOTA |
| Typical monitoring functions | Eco driving, fuel monitoring, crash detection, towing detection, ignition monitoring, geofencing, and immobilization |
The exact cellular bands and SIM configuration should be selected according to the required regional order code.
3) Tech Support/Dokuments
Web available technical information usually covers installation, configuration, wiring, connector pinouts, SIM-card installation, LED indications, input and output configuration, analog and impulse input operation, fuel-flow-meter integration, Bluetooth® device pairing, 1-Wire and CAN-adapter use, iButton operation, device configuration, SMS and GPRS commands, FOTA updates, sleep modes, supported scenarios, certifications, safety information, troubleshooting, and firmware changes.
Fee-based technical support is available from Mirifica Industrial.
4) Related Product Suggestion
Manufacturer-mentioned add-on products and accessories include:
- Teltonika EYE Bluetooth® sensors and beacons
- Bluetooth® temperature and humidity sensors
- Bluetooth® movement and magnetic sensors
- 1-Wire TTJ temperature sensors
- iButton readers and identification accessories
- Fuel-flow meters connected through the impulse inputs
- CAN adapters
- Vehicle door sensors, alarm buttons, and seatbelt-detection accessories
5) Downloads/Links
6) What is in the package
The package contains:
- 1 × FMC230 device
- 1 × input/output power-supply cable with 2 × 6 connection pins
- 1 × Micro-USB cable
- 1 × 3.7 V, 170 mAh rechargeable Li-Ion battery
More Details:
TRACK