Description and Technical Data:
1) Overview/Key Features
The TEBF0808-05 UltraITX+ is a Mini-ITX carrier board for Trenz Electronic TE0803, TE0807, and TE0808 Zynq™ UltraScale+™ MPSoC modules. It exposes the module’s board-to-board connector signals through accessible interfaces and provides integrated peripherals for evaluation, prototyping, and embedded-system development. Its standard Mini-ITX form factor allows installation in compatible PC enclosures.
Key features include:
- Mini-ITX form factor compatible with PC enclosures
- ATX-24 power-supply connector
- Optional 12 V standard power input
- Intel-compatible headers for HDA audio, power/reset buttons, power/HD LEDs, and PC speaker
- On-board power and reset switches
- Two 4-bit configuration DIP switches
- Two optional four-wire PWM fan connectors
- PCIe connector with one PCIe lane
- CAN FD transceiver with 10-pin IDC connector and six-pin header
- Dual SFP+ connector cage
- DisplayPort interface with one lane
- SATA connector
- Two USB 3.0 Type-A host connectors
- On-board USB 3.0 connector with two ports
- FMC HPC slot
- FMC fan connector
- Gigabit Ethernet RGMII PHY with RJ45 MagJack
- MicroSD/MMC bootable card socket
- 32-Gbit / 4-GB on-board eMMC flash
- Four configuration EEPROMs
- Two system-controller CPLDs based on Lattice MachXO2 1200 HC
- Samtec FireFly interface with four bidirectional gigabit-transceiver lanes
- FireFly reverse-loopback connector
- 20-pin ARM JTAG connector for PS JTAG0
- Three Pmod connectors
- Programmable quad PLL clock generator
- Two SMA clock connectors
- On-board DC-DC power-management devices
- 170 mm × 170 mm board size
- 5 mm mating height with standard connectors
The board is intended for use with a compatible TE080X UltraSOM module; the MPSoC module is not included with the carrier board.
NCNR non cancelable - non returnable product. B2B customers please contact Mirifica Industrial for volume quotes. Mirifica Industrial ships world-wide.
2) Tech Specs
| Specification | Detail |
|---|---|
| Product type | UltraITX+ baseboard / carrier board |
| Manufacturer article number | TEBF0808-05 |
| Form factor | Mini-ITX |
| Board dimensions | 170 mm × 170 mm |
| Compatible modules | TE0803, TE0807, TE0808 |
| Module family | Trenz Electronic TE080X Zynq UltraScale+ MPSoC modules |
| Main power input | ATX-24 power-supply connector |
| Additional power input | Optional 12 V standard power plug |
| PCIe | One PCIe lane through a 16-lane connector |
| Ethernet | Gigabit Ethernet RGMII PHY with RJ45 MagJack |
| SFP+ | Dual SFP+ connector, 2 × 1 cage |
| DisplayPort | 1 × DisplayPort, single lane |
| SATA | 1 × SATA connector |
| USB host | 2 × USB 3.0 Type-A connectors |
| On-board USB | 1 × USB 3.0 connector with two ports |
| CAN | CAN FD transceiver; 10-pin IDC connector and 6-pin header |
| FMC | FMC HPC slot |
| MicroSD | Bootable MicroSD/MMC card socket |
| eMMC | 32 Gbit / 4 GB on-board eMMC flash |
| EEPROM | 4 × configuration EEPROMs |
| System controllers | 2 × Lattice MachXO2 1200 HC CPLDs |
| FireFly interfaces | 1 × four-lane bidirectional interface; 1 × reverse-loopback connector |
| JTAG | 20-pin ARM JTAG connector for PS JTAG0 |
| Pmod | 3 × Pmod connectors |
| Clock generation | Quad programmable PLL clock generator |
| Clock connectors | 2 × SMA coaxial clock connectors |
| Fan interfaces | 2 × optional 4-wire PWM fan connectors; FMC fan connector |
| Configuration controls | 2 × 4-bit DIP switches |
| PC-compatible headers | HDA audio, power/reset, power/HD LED, and PC speaker headers |
| Board controls | On-board power and reset switches |
| I²C | Carrier-board peripheral I²C interfaces multiplexed to the MPSoC I²C interface |
| Mating height | 5 mm with standard connectors |
| Required external hardware | 12 V / 2.5 A switching power supply |
Exact mechanical details should be taken from the applicable assembly documentation. Please note PCN https://wiki.trenz-electronic.de/display/PD/PCN-20240611+TEBF0808-04A+to+TEBF0808-05+Hardware+Revision+Change .
3) Tech Support/Dokuments
Web available technical information usually covers the carrier-board architecture, compatible TE080X modules, Mini-ITX mechanical dimensions, power inputs, connector interfaces, communication peripherals, storage interfaces, clocking resources, JTAG access, system-controller CPLDs, and the board’s scope of delivery.
Design and integration work should account for the selected TE080X module, the required 12 V / 2.5 A power supply, enclosure clearances, connector mating height, cooling requirements, FPGA/MPSoC configuration, and the electrical characteristics of the connected FMC, PCIe, Ethernet, USB, SFP+, SATA, CAN FD, and Pmod interfaces. The manufacturer also identifies a product wiki and support forum as additional technical resources.
Contact Mirifica Industrial for further detailed information for your project.
4) Related Product Suggestion
There are the following related accessories:
- TE0803, TE0807, or TE0808 UltraSOM MPSoC modules
- 12 V / 2.5 A switching power supply
- FMC expansion cards
- Pmod-compatible peripheral modules
- SFP/SFP+ accessories
- Cooling solutions and module heat spreaders
The TE080X MPSoC module and 12 V / 2.5 A power supply are required for operation but are not part of the baseboard itself.
5) Downloads/Links
6) What is in the package
The package contains.
- 1 x TEBF0808-05 UltraITX+ baseboard for Trenz Electronic TE080X series MPSoC modules
- 2 x XMOD FTDI JTAG adapters for programming the MPSoC and system-controller CPLDs
- TE0790-03 compatible XMOD FTDI JTAG adapter configuration
- TE0790-03L NOT Xilinx tool compatible XMOD FTDI JTAG adapter configuration